-
×
Tsurumi LB-480 Clean Water Pump
1 × $401.00
Tsurumi LB-480 Clean Water Pump Subtotal: $401.00
Sequence Titan Series Water Pumps
$2,460.00 – $3,349.00
As large water features and high turnover requirements continue to gain popularity, the cost of energy does not! The Sequence Titan series is sure to cover most large scale water feature requirements. The highest efficiency pumps available for water garden applications – where you need them most, in high flow! With flow rates between 12,500 and 18,400 GPH and head capabilities between 21 and 45 feet, the Sequence Titan series is sure to cover most large-scale water feature requirements.
- Made in the USA
- 3″ Inlet/ 2″ Discharge
| Stock | size | Price | |
|---|---|---|---|
| 12000 | $2,460.00 | ||
| 12000 w/ Flanges | $2,549.00 | ||
| 18000 | $3,259.00 | ||
| 18000 w/ Flanges | $3,349.00 |
Description
As large water features and high turnover requirements continue to gain popularity, the cost of energy does not! Sequence is the leader in external pumps for durability and long-lasting performance. The Sequence Titan Pumps are made in the USA and pre-tested to meet the design requirement to move a lot of water quickly in high-pressure situations. With flow rates between 12,500 and 18,400 GPH and head capabilities between 21 and 45 feet, these external water fountain pumps can handle the most elaborate filtration system and water features.
Tech Specs
12,000 GPH
|
18,000 GPH
|
|
|---|---|---|
| Application | Out of Water | Out of Water |
| Motor Type | End-Suction Centrifugal | End-Suction Centrifugal |
| Sequence Model(s) | 12000SEQ21 12000SEQ21-K |
18000SEQ45 18000SEQ45-K |
| Max Flow Rate | 12,500 GPH | 18,400 GPH |
| Max Head Pressure | 21 Feet | 45 Feet |
| GPH@ 10′ | 10,000 GPH | 16,500 GPH |
| GPH @ 20′ | 4,200 GPH | 14,280 GPH |
| Inlet/Discharge Size | 3″ Flanged Inlet / 2″ Flanged Discharge | 3″ Flanged Inlet / 2″ Flanged Discharge |
| Wattage | 845-Watts | 2,110-Watts |
| Voltage/Max Amps | 115V / 9.6 Amps 230V / 6 Amps |
115V / 27.1 Amps 230V / 10.8 Amps |
| Motor Size | 3/4 HP | 3 HP |
| Max Case Pressure | 100 PSI | 100 PSI |
| Motor Enclosure | Totally Enclosed, Fan-Cooled (TEFC) | Totally Enclosed, Fan-Cooled (TEFC) |
| Warranty | 5-Year | 5-Year |
| Optional Flange Kit Available | Yes | Yes |
| Optional Check Valves (Sold Separately) |
Swing Check Valves | Swing Check Valves |
| Optional Strainer Baskets (Sold Separately) |
PurFlo 500 cu in | PurFlo 500 cu in |
*Optional Strainer Baskets (Sold Separately) are ideal to use with the Sequence Pumps in applications that might encounter a lot of debris.
Installation Guide
Flooded Suction
• Ideal setup as it does not require priming.
• Ball Valve installed before and after the pump for ease of maintenance.
• We recommend installing a Union before and after the pump for ease of disassembly and maintenance.
Suction Lift
• Suction lift must be installed with a Swing Check Valve.
• Check Valve installation is required below water level to avoid dry running unit and aids in priming.
Maintenance
Lubrication Motor – Permanently Lubricated ball bearings – no service required.
Rotary Seal – Requires no lubrication after assembly.
Winter Care: This pump must be drained before servicing or if stored below freezing temperatures. Periodic replacement of seals may be required due to normal carbon wear.
The Flow Chart below is designed to allow you to plot your pond’s water-flow requirements, and easily determine which pond pump will meet those requirements.
Flow Chart
Aim for the Middle of the Curve:
After plotting your calculation on the Flow Chart, find a pump that falls in the middle third of the pump curve, not too close to either axis. Pumps that fall on the fringes of the curve will not work as efficiently for your application, and they will be pushed to their operating limits, reducing their life span.
Other Considerations When Choosing a Pump:
It’s Better to Oversize than Undersize: You are better to slightly oversize a pump than to undersize. When oversizing, you can always install a ball valve to reduce the water down to your desired flow.
Check Your Other Equipment: Choose a pump that does not exceed the indicated maximum flow rate on your filter or water feature. Also, be sure the tubing you select can handle the flow rate of your pump.
Additional information
| size | 12000, 12000 w/ Flanges, 18000, 18000 w/ Flanges |
|---|
