Sequence Waterways Strainer-90ci

$122.45

Sequence 1 1/2″ 90 ci Strainer Baskets are great for those applications that demand debris interception so debris will damage your external pump.

Discharge Outlet:  1 1/2″
Inlet:  1 1/2″
Dimensions:  7″ Diameter x 9″ (11″ Wide with fittings)
Warranty:  1 Year

Sequence 2″ 90 ci Strainer Baskets are great for those applications that demand debris interception so debris will damage your external pump.

Discharge Outlet:  2″
Inlet:  2″
Dimensions:  7″ Diameter x 9″ (11″ Wide with fittings)
Warranty:  1 Year
Stock size Price
1.5" $122.45
2" $122.45
SKU: N/A Category:

Description

Sequence® 90 Cubic Inch Strainer Baskets are great for those applications that demand a debris basket so that it will damage your external pump, or for retaining a small amount of water to prime the external pump. In short, Sequence strainer baskets work both as leaf baskets and priming pots.

Model 1000.771-1 1000.771-7
Discharge Outlet 1.5″ 2″
Inlet 1.5″ 2″
Dimensions 7″ Diameter x 9″ Wide (11″ with Fittings)
Warranty 1 Year

 

Rated for 25 PSI

Note that the baskets have a collar on one end that fits the inlet on external pumps. On the other end they have a SLIP connector to attach to piping.

Additional Parts Available:
The 417-5170 fits the odd threads on the split black collar of the strainer basket and adapts it to a regular 2″ MPT (Male Pipe Thread) which will fit certain pumps with FPT (Female Pipe Threads). The A40032.5 also fits the odd thread on the split black collar on the leaf basket and adapts to SLIP (glues to 2″ Schedule 40 PVC).

Features

  • Simplifies the process of priming an external pump

  • Built in strainer basket to trap leaves & debris

  • Outlet is 2″ male pipe thread, inlet is 2″ slip (after connecting included fittings)

  • Use the 500 ci priming pot in applications that demand large debris interception to prevent damage to the external pump

For applications where an external pump is located above the elevation of the pond surface, the pump must be manually primed before use.  Priming a pump is the process of filling the pump and lines with water so when the pump is turned on, it will start pumping water immediately.  If an external pump is not primed properly, the pump will only contain air and won’t pump any water!

A priming pot greatly simplifies the process of priming an external pump.  The priming pot is placed next to the pump, connected to the pump via PVC pipe and/or fittings.  As long as a check valve is installed at the water intake in the pond, the priming pot can be manually filled with water to completely fill the priming pot, the pump and all pipes between the pump and water intake.  The check valve at the water intake is what prevents the water from leaking back into the pond and is an essential part of this process.

Once the priming pot is filled with water, the pump, that is now full with water, can be switched on to begin operation.

Another application where the Sequence Priming Pot / Strainer Basket is useful is in situations where unfiltered water is being brought straight from the pond into the pump.    Without some kind of pre-filter or pond skimmer, the water from the pump intake may contain leaves or other debris present in the pond.  The Sequence Priming Pot has a built in strainer basket that will filter out leaves and other debris to keep it from entering the pump.

Specifications

 Inlet (top of unit): Included fitting converts to 2″ Slip
 Outlet (bottom of unit): Included fitting converts to 2″ MPT
 Dimensions     7″ Diameter x 9″ (11″ Wide with fittings), 10.5″ Height
 Warranty:  1 Year

 

Sequence Strainer basket diagram

Additional information

size

1.5", 2"