Franklin Electric Little Giant PES-130-PW Pump – 130 GPH
$58.80
| Statuary Fountain Pump, 130 GPH | ||||||||||
| Mag-drive pumps utilize an epoxy-encapsulated motor and plastic housing. A permanemt magnet is attached to the impeller and acts as the rotor would in a conventional motor. The water being pumped surrounds the rotor. They are seal-less and oil-less. | ||||||||||
|
Description
The Little Giant PES Series wet rotor pumps are designed to operate continuously with minimal energy consumption. These wet rotor pumps offer a corrosion-resistant body specifically for submersible use. The PES Series include built-in adjustable flow control valves. Easy to install and maintain, wet rotor pumps are ideal for a variety of applications including table-top features, pond fountains or small waterfalls, or hydroponic ebb and flow or drip systems. Unit has 1/2-inch barbed discharge with 5/8-inch, and 3/4-inch barbed adapters included.
Ratings |
|
| Amps – Full Load | 0.23 A |
| Full Load Watts | 11 W |
| Volts | 115 VAC |
| Cord Length | 6 ft |
| Maximum Flow Rate – 60Hz | 2.17 gpm / 130 gph |
| Shut-Off | 5.5 ft |
Installation |
|
| Discharge Type | Barb |
| Discharge | 0.5 “ |
| Suction Type | Screened |
| Product Length | 3.5 “ |
| Pump Length | 3.5 “ |
| Product Weight | 1.4 lb |
| Product Weight w/ Pack | 1.9 lb |
| Carton Length | 5.5 “ |
| Carton Width | 7.75 “ |
| Carton Height | 5 “ |
The Little Giant PES Series Pump will operate continuously with very low energy costs. It’s magnetic-drive has a corrosion-resistant body specifically for submersible use. It has an adjustable flow control valve and a ceramic shaft for a long life expectancy.
-
Magnetic Drive PES-130-PW Pump
-
Max. Flow Rate – 130 GPH
-
Flow Rate @ 1′ – 130 GPH
-
Flow Rate @ 3′ – 85 GPH
-
Max. Head – 5.5′
-
Watts – 11
-
Outlet Size – 1/2″ or 5/8″ Barbed
-
Cord Length – 6′
-
Dimensions (L x W x H) – 3.5″ x 3.2″ x 2.8″
-
Warranty – 3 Years
