Franklin Electric Little Giant PES-80-PW Statuary & Fountain Pump – 77 GPH
$44.10
The Little Giant PES Series wet rotor pumps are designed to operate continuously with minimal energy consumption. These wet rotor pumps offer a corrosion-resistant body specifically for submersible use. The PES Series include built-in adjustable flow control valves. Easy to install and maintain, wet rotor pumps are ideal for a variety of applications including table-top features, pond fountains or small waterfalls, or hydroponic ebb and flow or drip systems.
Ratings |
|
Amps – Full Load | 0.14 A |
Full Load Watts | 8 W |
Volts | 115 VAC |
Maximum Flow Rate – 60Hz | 1.28 gpm / 77 gph |
Shut-Off | 3.5 ft |
Installation |
|
Discharge Type | Barb |
Discharge | 0.5 “ |
Suction Type | Screened |
Pump Length | 2.8 “ |
Product Weight w/ Pack | 1.5 lb |
Carton Length | 4 “ |
Carton Width | 7.5 “ |
Carton Height | 3.25 “ |
Description
Little Giant PES-80-PW Statuary & Fountain Pump – 77 GPH (566714)
The Little Giant PES-80-PW Statuary & Fountain Pump is designed to operate continuously with minimal energy consumption. The Little Giant PES-80-PW Statuary & Fountain Pump is a magnetic-drive pump that features a corrosion-resistant body specifically for submersible use. Easy to install and maintain, Little Giant magnetic drive pumps are ideal for a variety of applications.
The Little Giant PES-80-PW Statuary & Fountain Pump comes with a three-year manufacturer’s limited warranty.
Key Features
- Extremely energy efficient
- Compact design
- Quiet operation
- Provides years of trouble-free operation
- 1/2″ or 3/8″ barbed discharge
- Built in adjustable flow control valve
- 6 ft. power cord
Warranty
- 3-year manufacturer’s limited warranty
IMPORTANT
- The Little Giant PES-80-PW Statuary & Fountain Pump must be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter) protected 120 Volt outlet
- The Little Giant PES-80-PW Statuary & Fountain Pump is not approved for use in swimming pools or salt water
Specifications
Little Giant Part Number | PES-80-PW (566714) |
Maximum Flow Rate | 77 GPH |
Maximum Head | 3.5 ft. |
Power Consumption | 8 W |
Discharge | 1/2″ or 3/8″ barbed |
Power Cord Length | 6 ft. |
Voltage | 115 V, 60 Hz. |
Dimensions | 2.8″ L x 2.3″ W x 1.9″ H |