Franklin Electric Little Giant WGFP-200 Water Feature Pump

$1,537.90

The Little Giant WGFP-200 Water Feature Pump is constructed with stainless steel, cast iron and durable thermoplastic. As with other solids-handling submersible water feature pumps, it meets the rigorous demands of the most impressive waterfalls, ponds and streams.


Key Features

  • Stainless steel, cast iron and thermoplastic construction
  • Solids handling
  • Fish safe – uses no oil
  • Low maintenance
  • 19 ft. power cord


Warranty

  • 2-year manufacturer’s limited warranty


IMPORTANT

  • The Little Giant WGFP-200 Water Feature Pump must be wired in to a properly grounded and GFCI (Ground Fault Circuit Interrupter) protected 230 Volt circuit by a licensed electrician
  • The Little Giant WGFP-200 Water Feature Pump is not approved for use in swimming pools or salt water
Category:

Description

Circulation is key to the success of any water garden. The Little Giant Water WGFP-200 is one of the largest water feature pumps in their line up and are designed to act as the heart of a pond. With a flow rate of around 16,000 gallons per hour @ 5ft of height, this pump is a sure hit. Constructed with stainless steel, cast iron and durable thermoplastic, the new solids-handling Little Giant submersible water feature pumps meet the rigorous demands of the most impressive waterfalls, ponds and streams.

  • Heavy-Duty stainless steel motor housing.
  • Clog-Resistant design.
  • Continuous Duty rated.
  • Energy efficient PSC Motor. Professional-Grade Sealing – Double mechanical and single radial-lip shaft seals.
  • Includes 2-year limited manufacturer’s warranty.
Information:
Item number 566072
Model WGFP-200
Max Head Height 45′
Solids handling Capable of handling up to 1″ solids
Flow Rate 16,000 GPH @ 5ft
Watts 2085
Amps 9
Volts 230V 60hZ (must be hardwired) Pump has 3 bare wires.
Horsepower 2
Cord Length 19′
Approximate MFG Provided Dimensions 7.5″ D x 11.75″ W x 20.75″ High
Weight approx 65 lbs
Discharge 3″ FPT
Recommended Pipe Size for Max Flow Rate 3″ or 4″ ID Depending on head height (May require adapters)
Manufacturer Spec Sheet Spec Sheet .PDF
Limited Warranty 2 Years